Showing Tag: "maintenance" (Show all posts)

Motorbike maintenance you can do yourself

Posted by Dave Steadman on Monday, September 4, 2023, In : Motorcycle Maintenance

When it comes to motorcycles, a little do-it-yourself maintenance could save you money and help keep you safe and also empower you. There’s a sense of confidence every time I ride the bike that everything’s just right. Here are some top tips for mastering your own motorcycle maintenance.

In practice, the requirements of each of these tasks can vary depending on your bike. Consult your owner’s manual before beginning to educate yourself about matters such as the location of filters and pl...

Checking a motorcycle battery

Posted by Howard Trott on Friday, April 27, 2018, In : Motorcycle Maintenance

With the battery removed, inspect the condition of the anti-vibration padding inside a battery carrier. Check the rubber padding inside the battery carrier. Check the rubber padding for damage, hardening of the rubber or bits missing. If this padding is damaged, the battery will rattle around inside the carrier, leading to vibration of the internals, and a shortened battery life.

Place the battery on a flat and safe surface and look at the liquid levels. They should all be above the LOWER LEVE...
Continue reading ...

Cleaning your motorcycle

Posted by Howard Trott on Thursday, October 26, 2017, In : Motorcycle Maintenance

Whether you own a custom cruiser or a sports bike, you'll want to keep your motorcycle away from commercial washing facilities and perform the cleaning ritual yourself. Those high-pressure hoses can damage bike parts, which are more vulnerable than mechanical parts in cars.

Be sure you find a shady spot to wash (and dry) your bike since the sun can create temperature differentials that harm paint and allow water to leave spots.

Assemble the following items as needed:

A bucket for soapy water
Soap...

Maintaining your motorbike

Posted by Howard Trott on Tuesday, September 5, 2017, In : Motorcycle Maintenance

A motorcycle requires a lot of maintenance. Motorcycles are different from cars because you only have two wheels to take you down the road, and one loose bolt on a bike can mean the difference between an enjoyable Sunday afternoon ride or a breakdown -- or worse yet, a crash. We will discuss routine motorcycle maintenance, what to look for, and how to accomplish it.

Keep It Clean

While routine cleaning will make sure your bike to always looks its best, the simple act of washing and detailing ...

Motorcycle tyre checks

Posted by Howard Trott on Thursday, October 22, 2015, In : Motorcycle Maintenance

Motorcycle tyres must be checked when cold, not immediately after riding. Low tyre pressure may cause the tyre to slip on the rim or come off. High tyre pressures will cause abnormal tread wear and unsafe handling.

Use an accurate pressure gauge, many garage forecourt gauges are wildly inaccurate. If you buy your own spend as much as you can justify on a quality gauge.

Correct air pressure will increase tyre life and provide maximum stability, handling capability and ride comfort.

Tyre Care

Ch...
Continue reading ...

Building Up A Toolkit

Posted by Howard Trott on Wednesday, November 20, 2013, In : Motorcycle Maintenance

Good quality tools are as important to a motorcycle rider as a good set of riding clothes and helmet. The best and usually most expensive tools are really the preserve of the person who makes their living servicing and repairing motorcycles. The motorcycle rider services their motorcycle by following the manufacturer's recommendations on a time or mileage basis, but this doesn't mean that those old spanners and hammer that were found at the back of the shed will do.

Purchase what you can affo...
Continue reading ...

« Back to posts